Our skinny braid in a minimal stick.
Available in 18K Yellow Gold with 18K posts & nuts, Sterling Silver and Black Patina Dip both with sterling silver posts & nuts
2.75mm wide & 23.5mm high
Finish Options: Matte, Satin Polish, or Black Patina Dip
Made in NYC. Please allow 4 weeks for delivery.
All sales final.
18K Yellow Gold
Although we put our best efforts into displaying our products as accurately as possible, the colors of the metals, stones and enamel that you view on your computer monitor may be different from the actual colors of these products. BALTERA is not responsible for any inaccuracy in this regard.
Simplicity of Form. Our classic 3 strand flat plait. Metal & Finish Options Available in 18K...
A small nugget of our Classic Braid for a minimalistic approach. Simple enough to be worn every...
Our 3 plait earrings with the perfect drop- just below the earlobe. Metal & Finish Options...
Our Deco inspired Drop Plait with cylinder cut sodalite. Metal & Finish Options Available in 18K...
You can use this chart to help find your ring size. Use a piece of paper to measure the circumference of your finger, carefully mark where the ends meet and then straighten against a ruler to measure the length in millimeters (mm). If you are in between sizes we recommend sizing up. Our rings can be custom ordered in whole, half and quarter sizes. Please note: certain sizes may affect the price. For information & pricing about custom sizing and sizes smaller or larger than listed on this chart, please contact us. If you are unsure of your ring size, we recommend that you visit a local jeweler to have your finger sized.
|Women’s Ring Sizes|
|2 ½||42.9 mm|
|3 ½||45.5 mm|
|4 ½||48 mm|
|5 ½||50.6 mm|
|6 ½||53.1 mm|
|7 ½||55.7 mm|
|8 ½||58.3 mm|
|9 ½||60.8 mm|
|Men’s Ring Sizes|
|8 ½||58.3 mm|
|9 ½||60.8 mm|
|10 ½||63.4 mm|
|11 ½||65.9 mm|
|12 ½||68.5 mm|
|13 ½||71 mm|
Please note that these ring size charts are for reference only.
Use the Cuff Sizer provided below or a tape measure.
HOW TO USE THE BALTERA CUFF SIZER
Cut out the paper Cuff Sizer and follow these instructions:
Make sure the numbers are on the outside of the paper Cuff Sizer and insert the pointed end through the opening slit you have cut at the other end of the Cuff Sizer indicated by the (cut here). Place your hand through the Cuff Sizer and pull the pointed end until it fits comfortably on your wrist. The number that lines up with the edge of the opening is your wrist size.
To ensure the cuff fits comfortably please add 1.5 cm. Add or subtract cm's for a tighter or looser fit if preferred.
Be sure to print Cuff Sizer provided here with "no scaling" at 100% on standard letter (8.5" x 11") paper.
Our cuffs can be custom ordered in additional sizes. For information & pricing about custom sizing please contact us. If you are unsure of your cuff size, we recommend that you visit a local jeweler to have your wrist sized.